Tondi e Manicotti in PTFE vergine e caricato
The main features are:

- Complete chemical inertia that is resistant to almost all chemicals
- Complete insolubility in water and any organic solvent
- Optimal power (65 kV/mm dielectric strength)
- Excellent resistance to fire does not propagate the flame
- Excellent flow properties on the surface: the coefficient of friction is the lowest among the industrial products

These characteristics are maintained practically unchanged in a temperature range between -80°C and 250°C

Some trade names corresponding:   Teflon® DuPont - Fluon®  Asahi - Algoflon®  Solvay - Dyneon® (Hostaflon+Fluorel)

MOLDS LIST (.PDF)
available for molding
RODS and TUBES
in
PTFE
Virgin and filled

Molds for measures not listed
are made on request

info@serviceindustria.it
.

We can provide also FINISHED ITEMS
obtained by mechanical machining
info@serviceindustria.it.

RODS and TUBES on stock

PTFE Virgin
PTFE 25%
Carbon
PTFE 25% Soft carbon
PTFE 40%
Bronze
PTFE 60% Bronze
PTFE 40% Bronze + 3% Graphite
PTFE 15% Graphite
PTFE 15% Glass+5% MoS2
PTFE 3%
MoS2
PTFE 25% Glass
PTFE 25% Glass red
PTFE 28% Glass blue

For material in stock, shipment in
 2 working days, unless sold.

.

Inquiry: info@serviceindustria.it

Materials production standard

Formulations with different filler are made ​​on request.

- PTFE virgin . - PTFE + 40% Bronze+5% MoS2
- PTFE + 15% Glass . - PTFE + 40% Bronze+3% Grafite
- PTFE + 25% Glass . - PTFE + 40% Bronze green
- PTFE + 15% Glass+5% MoS2 . - PTFE + 15% Graphite
- PTFE + 15% Glass+5% Graphite . - PTFE + 15% Polyimide
- PTFE + 28% Glass blue - PTFE + 10% Polyester
- PTFE + 25% Soft carbon . - PTFE + 15% Alumina
- PTFE + 10% Carbon . - PTFE + 3% MoS2
- PTFE + 25% Carbon . - PTFE modified
- PTFE + 35% Carbon . - PTFE blue light
- PTFE + 35% Carbon+5% Graphte - TF® 1620 - Dyneon®
- PTFE + 23% Carb+2% Graphite (Carbograph.). - TF® 1750 - Dyneon®
- PTFE + 40% Bronze . - TFM® 1600 - Dyneon®
- PTFE + 60% Bronze . - TFM® 6221 - Dyneon®
. . .
. . .

           We can also provide ROLLS in PTFE meet standards:           
 FDA-WRC (water) - TüV EN751-3 (gas) - TüV EN1797-1 (oxygen and steam)

 varius items in PTFE unsintered expanded as adhesive TAPE, 
 graphited, lubricated; SHEETS 600x1200 mm - tickness: 1-1,5-2-3 mm 

Inquiry:   info@serviceindustria.it
.

RODS and TUBES on stok:    PCTFE Voltalef® 302 Arkema   -   PEEKTM Victrex®
info@serviceindustria.it  -   Ph.-Fax: +39 035 0400903
www.serviceindustria.it  - Services & Industrial Supplies

                                                       go up